Alta 02-13 Mini Cooper 22mm Adjustable Rear Sway bar Red

CONSTRUCTION

ALTA Sway Bars are made from solid steel using the latest precision bending equipment. The entire bar is powdercoated to fight corrosion and give it a deep red finish. We laser cut and MIG weld our bar ends for precise placement. This type of bar end far superior to many other methods and gives us greater precision over competitors. Some competitors simply smash the ends of their bars flat. This not only looks unattractive but also compromises the bar's integrity!

ADJUSTABILITY

ALTA Rear Adjustable Sway Bars incorporate multiple endlink mounting holes which allow the installer to custom tailor your driving experience. ALTA Sway Bars increase stiffness by a minimum of 100% over the stock bar. By adjusting the endlink mounting position you can increase that stiffness to as much at 400% over stock. *varies by model. See the Specifications Tab above for more detailed information.

CENTERING RINGS

ALTA Sway Bars feature centering rings that prevent sway bar movement in hard cornering. This keeps your sway bar centered and ready for the next corner.

BUSHINGS

All sway bars include polyurethane bushings for a crisp response and better turn in. Special pockets are carved into the bushing surfaces to capture grease and extends the interval between re-greasing.

19MM OR 22MM

ALTA Performance sway bars come in two different sizes. 19mm and 22mm. Driving enthusiast will enjoy the feelof a 19mm bar while true racers will like the rigidity of the 22mm. The softest setting on the 22mm is reflective of the stiffest setting on the 19mm bar.

HOLLOW VS SOLID BAR

Competitive manufacturers of hollow bars will attempt to argue that the weight reduction they offer is a huge advantage over solid bars and is worth the significant price increase. Realistically, for a daily driver the difference in weight is unnoticeable. The difference between most aftermarket sway bars, hollow and solid, is only 2 lbs!

WELDED OR SMASHED BAR ENDS

ALTA uses a precision laser to cut the multi-point sway bar ends from plate steel. Using a jig, we weld them onto our bars in the exact location for best articulation and leverage angles. Competitors who cheaply smash their bar ends in a press (same way the factory saves money) and simply drill holes for endlink mounts will try to convince consumers that laser cut steel and precision welding is somehow inferior and inexpensive. It just doesn't make sense.

SPECIFICATIONS